--- 模块功能:远程升级. -- 参考 http://ask.openluat.com/article/916 加深对远程升级功能的理解 -- @module update -- @author openLuat -- @license MIT -- @copyright openLuat -- @release 2018.03.29 -- 注意:实际升级是在系统启动时完成,update.lua是负责下载升级文件的 require "misc" require "http" require "log" require "common" module(..., package.seeall) --------------------------------------------- local filename = "stm8s.bin" local update_filesize = 0 ---------------------------------------------- --升级包保存路径 local UPDATE_PATH = "/update.bin" -- @param -- result true或者false,true表示成功收到了服务器的应答 -- prompt string类型,result为true时,表示服务器的应答码 -- head table类型,表示服务器的应答头 -- filePath string类型,如果调用request接口时传入了rcvFileName,此参数表示下载文件的完整路径 local function cbFncFile(result,prompt,head,filePath) log.info("testHttp.cbFncFile",result,prompt,filePath) if result and head then for k,v in pairs(head) do -- 泛型for循环打印服务器的应答头 log.info("testHttp.cbFncFile",k..": "..v) end end if result and filePath then local size = io.fileSize(filePath) log.info("testHttp.cbFncFile","fileSize="..size) -- 文件大小 end local fileHandle = io.open("/update.bin","r") if not fileHandle then log.error("OPEN FAILED!!") else if rtos.fota_start() == 0 then log.info("打开写FBF分区成功!!!") local pack = 1 local dataLen = io.fileSize(filePath) -- 升级文件大小(单位:byte) while true do if pack == 1 then print(fileHandle:seek("set")) -- 设置文件位置(从文件头开始) end print(fileHandle:seek("cur")) -- 上次读取数据的位置 local data = fileHandle:read(1024) if data == nil then log.info("File send ok and Flie is *K!!!") break end -- 升级文件是整K时,才会执行到这行 print(fileHandle:seek("cur")) -- 下次读取数据的位置 if rtos.fota_process(data,dataLen) == 0 then log.info("write FBF OK!!!") else log.info("write FBF failed!!!") end if data:len() < 1024 then break end -- 写入FBF分区完毕 pack = pack + 1 end if rtos.fota_end() == 0 then fileHandle:close() log.info("关闭写FBF分区成功!!!") pack = 1 log.info("write FBF end!!!") os.remove("/update.bin") sys.restart("Device update successful then restart!!!!!") end else log.info("打开写FBF分区失败!!!") end end end --- 启动远程升级功能 function run() log.info("开始升级!!!!") log.info("start update",rtos.get_fs_free_size()) local fileHandle = io.open("/update.bin","rb") if fileHandle then fileHandle:close() log.info("file ----------close!!!!") os.remove("/update.bin") log.info("start update",rtos.get_fs_free_size()) end local url = "/update/firmware_upgrade?imei=" .. misc.getImei() .. "&device_key=" .. misc.getSn().. "&firmware_name=" .. _G.PROJECT .. "&core_version" .. rtos.get_version() .. "&version=" .. _G.VERSION http.request("GET","8.136.98.49:8002"..url,nil,nil,nil,30000,cbFncFile,"update.bin") end --********************************************************************************-- --取回文件大小 local function getFilesize() local s = io.fileSize("/stm8s.bin") return s end --字符串转16进制 local function bin2hex(s) s = string.gsub(s,"(.)",function(x) return string.format("%s",string.byte(x)) end) return s end --校验 local function checksum(data_64) local i=0 local idx=1 local sum={0} local c_sum = 0 if #data_64 == nil or #data_64==0 then return end --log.info("getdata len,value:", string.toHex(data_64, " ")) -- 将返回的数据填充到result表 for i = 1,data_64:len() do idx,sum[i] = pack.unpack(data_64, "b", idx) --log.info("++++++++++++sum++++++++++++++:",sum[i]) c_sum = c_sum +sum[i] end --c_sum = string.format("%x",c_sum) --转换为16进制 -- c_sum = tonumber(c_sum) --字符串转number c_sum = pack.pack("b",bit.band(c_sum, 0xff)) --print("Check sum and data is====================================","%x",c_sum,string.toHex(data_64, " ")) return c_sum end --START APP local function start_app() local start_app = string.char(0xB0) uart.write(1,start_app) end --连接开始 --AA 42 4F 4F 54 34 0D 0A local function connect() local result,d local timeout = 0 local start_data = string.char(0xAA,0x42,0x4F,0x4F,0x54,0x34) while true do uart.write(1,start_data) log.info("----------------------connect:",string.toHex(start_data)) timeout = timeout + 1 if timeout == 50 then break end result,d =sys.waitUntil("YM_IS_OK",1000) if d and d:find('C') then log.info("********************************connect ok!!!*****************************") break end end end --设置Flash开始地址 local function Flash_start() -- 开始0x880000 local start_data = string.char(0xA0,0x00,0x00,0x88,0x00,0x88) local timeout = 0 while true do uart.write(1,start_data) log.info("----------------------flash set:",string.toHex(start_data)) timeout = timeout + 1 if timeout == 20 then break end result,d =sys.waitUntil("YM_IS_OK",1000) if d and d:find('S') then log.info("********************************connect ok!!!*****************************") break end end end local function xmodem(data) log.warn("start trans data!!!") local data = string.char(0xA1)..data..string.rep(string.char(0),64-data:len())..checksum(data) return data end --发某个数据,每次最多发送30次 local function sendData(s) local result, d local cnt = 0 uart.write(1,s) while true do log.info("send data value,len:", string.toHex(s, " ")) cnt = cnt + 1 d = "" result, d =sys.waitUntil("YM_IS_OK",1000) -- local d = uart.read(1,"*l") -- if s == string.char(EOT) and d~=nil then log.warn("will end!!!",d) uart.write(2,s) end if d and d:find("W") then return true end--收到了 if d and not d:find("W") then uart.write(1,s) end if d and d:len() == 0 and cnt == 30 then break end sys.wait(300) end end -- 清空串口的接收缓冲区: local function flush_uart_tmp() local clear_uart_tmp = uart.read(1,'*l') log.error("****************************clear_uart_tmp:",clear_uart_tmp) end -- sys.taskInit( -- function() -- local result,d -- local downnum = 20 -- while true do -- log.warn("20S后开始下载....") -- for i = 0,downnum do -- log.warn("start connect stm8s ....",i) -- log.info("size is ",i,rtos.get_fs_free_size()) -- log.info("RAM_USEAGE", collectgarbage("count") .. " KB") -- sys.wait(1000) -- end -- if scd.stm8_update_sw == 1 then -- -- 判断升级文件是否存在 -- fileHandle = io.open("/lua/stm8s.bin","rb") -- if not fileHandle then return end -- connect() -- update_filesize = io.fileSize("/lua/stm8s.bin") -- --设置Flash地址 -- Flash_start() -- result,d =sys.waitUntil("YM_IS_OK",1000) -- if d and d:find('S') then -- log.info("********************************Set Flash addr ok!!!*****************************") -- end -- log.info("start download!!!") -- local pack = 1 -- while true do -- if pack == 1 then -- print(fileHandle:seek("set")) --0 -- end -- print(fileHandle:seek("cur"))--从当前位置开始 -- local data = fileHandle:read(64) -- if data == nil then log.info("file send ok!!!") break end -- log.warn("data len",data:len()) -- print(fileHandle:seek("cur"))--从当前位置开始 -- local sd = xmodem(data) -- sendData(sd) -- if data:len() < 64 then fileHandle:close() break end --读完了 -- pack = pack +1 -- sys.wait(500) -- end -- scd.stm8_update_sw = 0 -- log.info("update success!!!") -- start_app() -- end -- sys.wait(100) -- end -- end) --A1 93 90 EE 03 FE F6 90 F7 90 5C 5C B3 9D 26 F6 A6 01 5F 97 81 B6 99 F1 26 1A B6 9A E1 01 26 0C B6 9B E1 02 26 06 B6 9C E1 03 27 08 9C 24 03 A6 FF 81 A6 01 81 E6 03 88 E6 02 88 FE 89 1E 03 B6 99 F3 F1 F2