--- SHT30 温湿度传感器驱动 -- @module SHT30 -- @copyright openLuat.com require "utils" module(..., package.seeall) --- 读取SHT30的数据 -->基于I2C_ModBus协议 -- @number id, 端口号0-2 -- @return string,string,第一个参数是温度,第二个是湿度 -- @usage tmp, hum = read() function read(id) if i2c.setup(id, i2c.SLOW) ~= i2c.SLOW then log.error("I2C.init is: ", "fail") i2c.close(id) return end i2c.send(id, 0x44, {0x2C, 0x06}) -- 读取SHT30传感器数据 sys.wait(2) local data = i2c.recv(id, 0x44, 6) i2c.close(id) if data == nil or data == 0 then return end log.warn("SHT30 HEX data::::::::::::::::", string.toHex(data," ")) local _, t_H, t_L, h_crc, h_H, h_L, t_crc = pack.unpack(data,'b6') -- 温度2--CRC1--湿度2--CRC1 if t_H and t_L and h_H and h_L then local tmp = ((1750 * ( t_H*256 + t_L) / 65535 - 450)) local hum = ((1000 * ( h_H*256 + h_L) / 65535)) -- 由于底层没有采用float库,数据放大10倍 log.warn("SHT30 data:", tmp, hum) return tmp, hum else return end end