control.h 14 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341
  1. /*
  2. * Copyright (c) 2006-2020, RT-Thread Development Team
  3. *
  4. * SPDX-License-Identifier: Apache-2.0
  5. *
  6. * Change Logs:
  7. * Date Author Notes
  8. * 2020-05-30 Administrator the first version
  9. */
  10. #ifndef APPLICATIONS_INC_CONTROL_H_
  11. #define APPLICATIONS_INC_CBD_CONTROL_H_
  12. #include <rtthread.h>
  13. #include <board.h>
  14. #include "stdio.h"
  15. #include <rtdevice.h>
  16. //定制相关//////////////////////////////////////////////////////
  17. #define LAMP_EN 0 //李新3灯管:0关闭,1打开
  18. #define PCB_V1 0 //1-旧PCB,0-新PCB(模块化)
  19. #define MATCH_DEVICE 0 //比赛设备1-开启 0-关闭
  20. #define SENSOR_EN 0 //温湿度:0关闭,1打开
  21. #define UART_TEST_EN 0 ///串口测试0-关闭,1-启用
  22. #define TG_MODULE 1 //推杆电机结构模块化控制
  23. #define DINGZHI_0722 0 //控制一个电机每天12点20工作12秒
  24. #define QINGSAO_IO 1 //调整清扫顺序20250801
  25. #define WENKONG 1 //温控功能1-开启 0-关闭
  26. #define YUKONG 1 //雨控功能1-开启 0-关闭
  27. #define QIANYA 1 //欠压功能1-开启 0-关闭
  28. #if MATCH_DEVICE == 1
  29. #define LAMP_CURRENT 600
  30. #else
  31. #define LAMP_CURRENT 400
  32. #endif
  33. ////////////////////////////////////////////////////////////////
  34. #if LAMP_EN == 1
  35. #define VERSION_HK "1.(3ledV9).41(HK)" //4.0海康-三色光源
  36. #define VERSION_HK_2000W "1.3led.40(2000W)" //水稻
  37. #else
  38. #define VERSION_HK "2.35.41(HK)" //4.0海康-1200W
  39. #if TG_MODULE == 0
  40. #define VERSION_HK_2000W "2.36.4(2000W)" //4.0水稻
  41. #else
  42. #if MATCH_DEVICE == 1
  43. #define VERSION_HK_2000W "3.0.4(TG)" //推杆结构比赛设备
  44. #else
  45. #define VERSION_HK_2000W "2.9.4(TG110)" //推杆结构
  46. #endif
  47. #endif
  48. #endif
  49. #define VERSION_ZP "2.35.1(ZP)" //1.0转盘
  50. #define VERSION_GK "2.35.1(GK)" //1.0高空
  51. extern rt_event_t event_485_play;
  52. /*********************************************************************/
  53. typedef struct _packed
  54. {
  55. uint8_t iSave; //存储标志位
  56. uint8_t dtype; //设备类型?7-孢子仪,3-测报灯
  57. uint8_t iFlag; //参数标志位: 1异常,0正常
  58. /*孢子仪*/
  59. uint8_t run_sta; //转盘的位置:0原始;1收集;2培养;3拍照;4凡士林,其他-测试
  60. uint8_t cul_time; //培养时间
  61. uint8_t stay_time; //已培养时间
  62. uint8_t pre_temp; //培养仓温度
  63. uint8_t box_temp; //箱体温度
  64. uint8_t auto_test_sw; //一键测试 0-关 1-开
  65. uint8_t cold_status; //制冷状态 0-关 1-开
  66. uint8_t cold_sw; //制冷开关 0-关 1-开
  67. uint8_t wind_sw; //风机开关 0-关 1-开
  68. uint8_t collect_fan_status; //采集状态 0-关 1-开
  69. uint8_t autotakepic; //对焦拍照 0-关 1-开
  70. uint8_t develop_flag; //是否进入培养模式
  71. uint8_t cool_fan_status; //散热风机状态 0-停止 1-打开
  72. uint8_t fsl_sw; //凡士林开关:0-关,1-开
  73. uint8_t collecting_sh1; //采集开启1
  74. uint8_t collecting_eh1; //采集关闭1
  75. uint8_t collecting_sh2; //采集开启2
  76. uint8_t collecting_eh2; //采集关闭2
  77. uint8_t collecting_sh3; //采集开启3
  78. uint8_t collecting_eh3; //采集关闭3
  79. /*测报灯*/
  80. uint8_t heat_tem_max; //恒温加热达到的最大温度;
  81. uint8_t heat_sw; //加热开关
  82. uint8_t photo_ws; //拍照
  83. uint8_t power_status; //电源
  84. uint8_t sun_test; //光控测测试标志位
  85. uint8_t heat_status; //加热状态 0-关 1-开
  86. uint8_t lamp_status; //灯管1状态 0-关 1-开
  87. uint8_t lamp1_status; //灯管2状态 0-关 1-开
  88. uint8_t lamp2_status; //灯管3状态 0-关 1-开
  89. uint8_t up_status; //上仓门状态 0-停止 1-打开 2-关闭
  90. uint8_t down_status; //下仓门状态 0-停止 1-打开 2-关闭
  91. uint8_t clear_status; //清扫状态 0-停止 1-开始
  92. uint8_t shake_ws; //震动 0-关 1-开
  93. uint8_t heatvalue; //加热设定温度
  94. uint8_t ctr_up_motor; //上仓门, 1打开,0关闭
  95. uint8_t ctr_down_motor; //下仓门, 1打开,0关闭
  96. uint8_t rain_status; //雨控 0-正常 1-欠压
  97. uint8_t temp_status; //温控 0-正常 1-温控
  98. uint8_t sun_status; //光控 0-正常 1-光控
  99. uint8_t lamp; //灯管状态 0-正常 1-异常
  100. uint8_t ds; //设备状态 0-关机 1-开机
  101. uint8_t work_status; //工作状态 0-待机 1-工作
  102. uint8_t work_done; //工作结束 1-正常 0-工作已结束
  103. uint8_t bat_status; //电压状态 0-正常 1-欠压
  104. uint8_t heattime; //加热时间
  105. uint8_t heat_time_min; //实时加热时间
  106. uint8_t clt_time; //收集时间
  107. uint8_t vol; //音量
  108. uint8_t refresh_num; //DTU数据刷新时间
  109. uint8_t refresh_timeout; //刷新超时时间
  110. uint8_t sunBar; //光控定时时间
  111. uint8_t startBar; //时控开始时间
  112. uint8_t stopBar; //时控结束时间
  113. uint8_t tph; //高温保护
  114. int8_t tpl; //低温保护
  115. uint8_t timeSwitch; //模式0光控,1时控
  116. uint8_t link_sta; //有线接入状态:0-未接入,1已接入
  117. uint8_t heattem; //加热仓温度(实时)
  118. uint8_t hmi_fresh; //是否启动屏幕
  119. uint8_t update_flag; //是否启动升级
  120. uint8_t photo_type; //相机类型,0-USB,1-海康,2-大华
  121. uint8_t version_type; //版本类型,1-转盘,4-海康,41-水稻,11-高空,48-4800
  122. uint8_t stop_in_bootloader; //进入bootloader模式 1
  123. uint8_t account_status; //卡状态
  124. uint8_t test_flag; //测试标志
  125. uint8_t sensor_485_sta; //485传感器
  126. uint8_t Power_Type; //供电类型
  127. uint8_t handle_bugger; //排虫模式,0推杆收回来是排虫,1推出去是收虫
  128. uint8_t collt_box_sta; //收虫仓状态
  129. uint8_t camsta; //拍照报警,0正常,1异常
  130. uint8_t heat_sta; //加热报警0-正常,1-异常
  131. uint8_t led_sta; //补光灯报警0-正常,1-异常
  132. uint8_t selfcheck_ws; //自检开关1-北大荒,2-标配
  133. uint8_t gps_inuse;
  134. uint8_t gps_view;
  135. uint8_t debug_ws; //调试开关,把调试信息上报到MQTT
  136. uint8_t work_mode; //工作模式:0-正常 1-预制
  137. uint8_t upan_sta; //0:正常 1-未连接
  138. uint16_t upan_photo_num;
  139. uint16_t dattim; //数据上传间隔
  140. uint16_t shake_sec; //震动时间
  141. uint16_t thsp; //息屏时间
  142. uint16_t C01; //故障码
  143. uint16_t route_off_t; //路由器断电时间
  144. rt_uint32_t num_updata; //
  145. rt_uint32_t rebootcnt; //启动次数
  146. rt_uint32_t light_over_tim; //光控定时差秒数,镇流器的结束时间
  147. rt_uint32_t data_plan; //流量套餐
  148. rt_uint32_t expiry_date; //到期时间
  149. int passWord; //初始密码
  150. double process;
  151. long photo_stamp; //采集时间戳
  152. const char *coll_time[10];
  153. char alarm_tg[12]; //闹钟时间
  154. char mqttcfg1[64]; //
  155. char mqttcfg2[64]; //
  156. char csq[8]; //信号强度
  157. char net[8]; //网络
  158. char sim[8]; //SIM卡
  159. char gps[8]; //定位状态
  160. char gps_state[8]; //定位类型
  161. char tempture[12]; //温度
  162. char humidity[12]; //湿度
  163. char driver[64]; //版本
  164. char driver_4g[64]; //4g版本
  165. char driver_bl[64]; //BL版本
  166. char driver_compile[64]; //BL编译时间
  167. char project[32]; //project,用于判断升级
  168. char lng[32]; //经度
  169. char lat[32]; //纬度
  170. char stamp[32]; //系统时间
  171. char fuse_voltage[32]; //保险丝电压
  172. char iccid[32]; //SIM卡ICCID
  173. char imei[32]; //IMEI,唯一ID
  174. char link_ip[32];
  175. char json_w_clock[128]; //修改时间
  176. char json_w_reset[128]; //
  177. char json_w_platform[128]; //
  178. char power[8]; //功率
  179. char heat_power[8]; //加热功率
  180. char voltage[6]; //电池电压
  181. char deviceId[32]; //bdh-设备编码
  182. char voltage_sun[8]; //太阳能板电压
  183. char qianming[128];
  184. char photolink[128]; //图片地址
  185. }Device_Status_typedef;
  186. /************************************************/
  187. #define ON 1
  188. #define OFF 0
  189. #define LED0_PIN GET_PIN(B, 3)
  190. #define Beep GET_PIN(B, 4)
  191. #define OPEN 0x02
  192. #define CLOSE 0x03
  193. /************************************************/
  194. //光控
  195. #define LIGHT_PIN GET_PIN(C,0)
  196. //雨控
  197. #define RAIN_PIN GET_PIN(C,1)
  198. //加热
  199. #define Heat_Pin GET_PIN(B,12)
  200. //采集/上仓门
  201. #define Collect_fan_R GET_PIN(C, 5)
  202. #if PCB_V1 == 0
  203. #define Collect_fan_L GET_PIN(B, 6)
  204. #else
  205. #define Collect_fan_L GET_PIN(C, 4)
  206. #endif
  207. //下仓门
  208. #define C_DOWN_R GET_PIN(B,0)
  209. #define C_DOWN_L GET_PIN(B,1)
  210. //镇流器
  211. #define LAMP_SW GET_PIN(C,9)
  212. //震动电机
  213. #define SHAKE_SW GET_PIN(B,2)
  214. //补光
  215. #define LED_SW GET_PIN(A,15)
  216. //清扫
  217. #define CLEAR_R GET_PIN(C,7)
  218. #define CLEAR_L GET_PIN(C,8)
  219. //相机供电
  220. #define PHOTO GET_PIN(A,12)
  221. //路由器供电
  222. #define ROUTER GET_PIN(A,8)
  223. //RTU/DTU供电
  224. #define RTU_DTU GET_PIN(B,13)
  225. //海康相机拍照
  226. #define HK_TAKE GET_PIN(A,11)
  227. #define HK_IO GET_PIN(B,14) //备用触发拍照
  228. //清扫限位
  229. #define CLEAR_R_LIMIT GET_PIN(C,13)
  230. #define CLEAR_L_LIMIT GET_PIN(B,9)
  231. /*****************************4.0定制多光源*********************************/
  232. #define LAMP_1_SW GET_PIN(B,10)
  233. #define LAMP_2_SW GET_PIN(B,11)
  234. /***************************高空测报灯*************************/
  235. //上仓门电机限位
  236. #define CTR_UPC_LIMIT GET_PIN(B,9)
  237. //下仓门电机限位
  238. #define CTR_DWO_LIMIT GET_PIN(B,5)
  239. #define CTR_DWC_LIMIT GET_PIN(B,8)
  240. //雨控电机限位,控制排水和落虫
  241. #define CTR_RO_LIMIT GET_PIN(B,15)
  242. #define CTR_RC_LIMIT GET_PIN(C,6)
  243. /******************************吸虫塔*********************************/
  244. #define PC7_TIM3_CH 2 //pwm8
  245. #define PC8_TIM3_CH 3 //pwm8
  246. #define PB1_TIM3_CH 4 //pwm3
  247. #define MOTOR1_CTR_PIN GET_PIN(C,9) //吸虫电机IO
  248. #define MOTOR2_CTR_PIN GET_PIN(B,2) //吸附电机IO
  249. #define MOTOR_CR_PIN GET_PIN(C,7)
  250. #define MOTOR_CL_PIN GET_PIN(C,8)
  251. #define MOTOR_C_LIMIT GET_PIN(C,13) //卷带限位
  252. void ctr_JD_Clear(uint8_t shake_sw);
  253. uint8_t ctr_Motor_xichong(uint8_t status_ws);
  254. uint8_t ctr_Motor_xifu(uint8_t status_ws);
  255. uint8_t ctr_Camera_Power(uint8_t status_ws);
  256. /*****************************5.0测报灯******************************/
  257. #define GUANG_SHAN GET_PIN(C,13) //光栅
  258. #define MOTOR_86 GET_PIN(B,9) //85电机限位
  259. void ctr_Motor_Driver_Power(uint8_t status_ws);
  260. /*****************************孢子仪**********************************/
  261. //制冷
  262. #define Cold_Pin GET_PIN(B,11)
  263. //采集
  264. #define Collect_Fan GET_PIN(B,10)
  265. //转盘
  266. #define TURN_ZP_R GET_PIN(B,0)
  267. #define TURN_ZP_L GET_PIN(B,1)
  268. //转盘限位
  269. #define LIMIT_0 GET_PIN(C,13)
  270. #define LIMIT_90 GET_PIN(B,9)
  271. //散热
  272. #define Cool_Fan_R GET_PIN(C, 5)
  273. #define Cool_Fan_L GET_PIN(C, 4)
  274. //步进电机限位
  275. #define LIMIT_UP GET_PIN(B,8)
  276. #define LIMIT_DOWN GET_PIN(B,5)
  277. //步进电机驱动
  278. #define Motor_EN GET_PIN(B,14)
  279. #define Motor_DIR GET_PIN(B,15)
  280. void ctr_turn(uint8_t v,uint8_t sta);
  281. uint8_t ctr_Cold(uint8_t status_cold);
  282. uint8_t ctr_Cool_Fan(uint8_t status_cool); //散热风机
  283. uint8_t ctr_Collect_Fan(uint8_t status_collect); //采集风机
  284. void ctr_Motor_Driver(uint8_t EN,uint8_t DIR,rt_uint32_t pwm,rt_uint32_t time_out); //步进电机
  285. void ctr_Petroleum_jelly(rt_uint32_t delay); //凡士林
  286. /*****************************定制4.0-2000W***************************************/
  287. /***************************************************************/
  288. uint8_t ctr_Heat(uint8_t status_heat); //加热
  289. uint8_t ctr_cangmen_up(uint8_t status_up); //上仓门
  290. uint8_t ctr_cangmen_down(uint8_t status_down); //下仓门
  291. uint8_t ctr_lamp(uint8_t status_lamp,uint8_t lamp_num); //镇流器
  292. uint8_t ctr_shake(uint8_t status_shake,uint16_t shake_sec); //震动
  293. uint8_t ctr_clear(uint16_t status_clear); //清扫
  294. void ctr_TG_Clear(uint16_t clear_timeout); //清扫2
  295. uint8_t ctr_led(uint8_t status_led); //补光灯
  296. void calorstat(uint16_t heat_time); //恒温
  297. void ctr_router(uint8_t status_router); //路由器
  298. void turnzp(void); //转仓
  299. void Hk_Take_io(void); //触发拍照
  300. void HK_TakePhoto(void); //拍照
  301. void ctr_photo(uint8_t status_photo);
  302. void ctr_RTU_DTU(uint8_t status_rtu);
  303. void HardWare_Init(uint8_t boot); //初始化
  304. void HardWare_Check(uint8_t boot); //自检
  305. void ResetInit(void); //上电复位
  306. void SunTest(void); //光控测试
  307. /*****************************************************/
  308. uint16_t ctr_xmove(uint32_t xdis,uint16_t pulse);
  309. /***********************孢子仪****************************/
  310. void alarm_app_router(void);
  311. /***************************************************/
  312. //线程
  313. int Control_clear(void);
  314. int Workstatus_check(void);
  315. int Work_Loop_Task(void);
  316. int Control_Check(void);
  317. int thread_485_play(void);
  318. int thread_delete_workloop(void);
  319. int thread_restart_workloop(void);
  320. #endif /* APPLICATIONS_INC_CONTROL_H_ */