| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195 |
- /*
- * Copyright (c) 2006-2018, RT-Thread Development Team
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Change Logs:
- * Date Author Notes
- * 2018-11-7 SummerGift first version
- */
- #include "drv_common.h"
- #include "board.h"
- /* HAL_Delay 的"tick 不动"兜底阈值: 连续这么多次循环 tick 都没变化,
- 就认为系统 tick 还没启动, 直接返回而不是死等。 */
- #define HAL_DELAY_NO_TICK_GUARD 1000000u
- #ifdef RT_USING_FINSH
- #include <finsh.h>
- static void reboot(uint8_t argc, char **argv)
- {
- rt_hw_cpu_reset();
- }
- FINSH_FUNCTION_EXPORT_ALIAS(reboot, __cmd_reboot, Reboot System);
- MSH_CMD_EXPORT_ALIAS(reboot, reboot, Reboot System);
- #endif /* RT_USING_FINSH */
- /* SysTick configuration */
- void rt_hw_systick_init(void)
- {
- #if defined (SOC_SERIES_STM32H7)
- HAL_SYSTICK_Config((HAL_RCCEx_GetD1SysClockFreq()) / RT_TICK_PER_SECOND);
- #else
- HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / RT_TICK_PER_SECOND);
- #endif
- HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
- HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
- }
- /**
- * This is the timer interrupt service routine.
- *
- */
- void SysTick_Handler(void)
- {
- /* enter interrupt */
- rt_interrupt_enter();
- HAL_IncTick();
- rt_tick_increase();
- /* leave interrupt */
- rt_interrupt_leave();
- }
- uint32_t HAL_GetTick(void)
- {
- return rt_tick_get() * 1000 / RT_TICK_PER_SECOND;
- }
- void HAL_SuspendTick(void)
- {
- }
- void HAL_ResumeTick(void)
- {
- }
- /* P3-6: 原来这里是空实现, HAL 内部所有依赖 HAL_Delay 的上电/复位时序被静默跳过
- (例如 HAL_RCC_OscConfig 的 LSE 起振等待、FLASH 编程等待等)。
- ⚠️ 不能简单写成 rt_thread_mdelay():
- ① 本文件开头的 hw_board_init() 在**调度器启动之前**就调用了 HAL_Init(),
- 此时 rt_thread_mdelay 会永久挂起 -> 整机起不来;
- ② 某些 HAL 内部会在中断上下文调用它。
- HAL_GetTick() 本文件已重定义为 rt_tick_get()*1000/RT_TICK_PER_SECOND, 用 tick
- 差值忙等对两种上下文都安全。
- ⚠️ 但 rt_hw_systick_init() 之前 rt_tick 根本不涨(恒为 0), 此时忙等会死循环;
- 所以额外做一个"tick 不动就放弃"的兜底 —— 宁可延时不精确, 也不能卡死在启动阶段。 */
- void HAL_Delay(__IO uint32_t Delay)
- {
- uint32_t start = HAL_GetTick();
- uint32_t last = start;
- uint32_t guard = 0;
- while ((HAL_GetTick() - start) < Delay)
- {
- uint32_t now = HAL_GetTick();
- if (now != last)
- {
- last = now;
- guard = 0; /* tick 在走, 正常计时 */
- }
- else if (++guard > HAL_DELAY_NO_TICK_GUARD)
- {
- break; /* tick 根本没在跑(启动早期), 不再死等 */
- }
- }
- }
- /* re-implement tick interface for STM32 HAL */
- HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
- {
- /* Return function status */
- return HAL_OK;
- }
- /**
- * @brief This function is executed in case of error occurrence.
- * @param None
- * @retval None
- */
- void _Error_Handler(char *s, int num)
- {
- /* USER CODE BEGIN Error_Handler */
- /* User can add his own implementation to report the HAL error return state */
- while(1)
- {
- }
- /* USER CODE END Error_Handler */
- }
- /**
- * This function will delay for some us.
- *
- * @param us the delay time of us
- */
- void rt_hw_us_delay(rt_uint32_t us)
- {
- rt_uint32_t start, now, delta, reload, us_tick;
- reload = SysTick->LOAD;
- us_tick = SystemCoreClock / 1000000UL;
- /* ★ 逐拍累计(2026-10-15 同步 master 修复):
- 原实现 `while(delta < us_tick * us)` 的目标值在 us >= reload/us_tick
- (本机约 1000us) 时超过 SysTick 装载值 —— delta 最大值就是 reload,
- 永远达不到目标 -> 死循环。改为"每拍最多等 reload/us_tick 微秒、
- 凑满再取新基准", 任意 us 都能正确返回。 */
- while (us > 0)
- {
- rt_uint32_t step = reload / us_tick; /* 一个 SysTick 周期覆盖的最大微秒数 */
- if (step == 0) step = 1;
- if (us < step) step = us;
- start = SysTick->VAL;
- do {
- now = SysTick->VAL;
- delta = start > now ? start - now : reload + start - now;
- } while(delta < us_tick * step);
- us -= step;
- }
- }
- /**
- * This function will initial STM32 board.
- */
- void hw_board_init(char *clock_src, int32_t clock_src_freq, int32_t clock_target_freq)
- {
- extern void rt_hw_systick_init(void);
- extern void clk_init(char *clk_source, int source_freq, int target_freq);
- #ifdef SCB_EnableICache
- /* Enable I-Cache---------------------------------------------------------*/
- SCB_EnableICache();
- #endif
- #ifdef SCB_EnableDCache
- /* Enable D-Cache---------------------------------------------------------*/
- SCB_EnableDCache();
- #endif
- /* HAL_Init() function is called at the beginning of the program */
- HAL_Init();
- /* enable interrupt */
- __set_PRIMASK(0);
- /* System clock initialization */
- clk_init(clock_src, clock_src_freq, clock_target_freq);
- /* disbale interrupt */
- __set_PRIMASK(1);
- rt_hw_systick_init();
- /* Pin driver initialization is open by default */
- #ifdef RT_USING_PIN
- extern int rt_hw_pin_init(void);
- rt_hw_pin_init();
- #endif
- /* USART driver initialization is open by default */
- #ifdef RT_USING_SERIAL
- extern int rt_hw_usart_init(void);
- rt_hw_usart_init();
- #endif
- }
|