/* * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2026-02-04 Administrator the first version * 2026-10-08 Administrator 取消后台 sys_monitor 线程(避免每 10s 自动刷屏): * 统计改为"用到时现场采集";新增控制台命令 * Msh_DisplaySysMonitor 手动输出全部统计 * 2026-10-08 Administrator 命令升级为类似 linux top 的界面:循环刷新 * CPU/RAM/外部Flash/分区/上报进度/工作状态/外设/ * 线程等;刷新间隔可调(命令参数),按 q 退出 */ #include "sys_monitor.h" #include "cpu_usage.h" #include "control.h" #include "sht30_collect.h" #include #include #include #include #include #define DBG_ENABLE #define DBG_COLOR #define DBG_TAG "sysmonitor" #define DBG_LEVEL DBG_LOG #include //must after of DBG_LVL, DBG_TAG or other options extern long list_thread(void); /* rt-thread/components/finsh/cmd.c:内核线程列表 */ Device_Status_typedef device_status; System_stats_t system_status; /* 刷新实时统计字段(原 sys_monitor 线程的职责,2026-10-08 改为"用到时现场采集")。 * 调用点:①控制台命令 top / Msh_DisplaySysMonitor;②upload_sys_monitor_info() 上报前。 * CPU 温度 = 读 MCU 内部温度传感器、CPU 利用率 = 读 idle 统计、运行时长 = 系统 tick, * 均为非阻塞快速操作,可在任意线程上下文安全调用。 */ void sys_monitor_refresh(void) { system_status.cpu_tempture = (int)Get_Temprate()/100; system_status.cpu_usage = (int)cpu_load_average(); if(system_status.cpu_usage > system_status.cpu_usage_max) { system_status.cpu_usage_max = system_status.cpu_usage; } system_status.system_uptime = (rt_uint32_t)(rt_tick_get() / RT_TICK_PER_SECOND); } /* ==================== top 式系统监控命令 ==================== */ #define SYS_MON_DEF_INTERVAL_SEC 1 /* 默认刷新间隔(秒) */ #define SYS_MON_MAX_INTERVAL_SEC 60 /* 刷新间隔上限(秒) */ #define SYS_MON_KEY_SLICE_MS 250 /* 等待刷新点时按键检查粒度 */ /* 绘制一屏监控信息: * CPU(利用率/温度/运行时长)、RAM(堆)、外部Flash参数、FAL分区表、数据上报进度、 * 工作状态与进度、外设设备状态、通信/报警状态、线程状态(list_thread)。 */ static void sys_mon_show_screen(void) { rt_uint32_t total = 0, used = 0, max_used = 0; rt_uint32_t total_sec; time_t now; static struct tm tm_buf; int i; size_t part_num = 0; const struct fal_partition *part_table; const struct fal_flash_dev *onchip; sfud_flash_t nor; /* 清屏并回到左上角(VT100 序列,Xshell/MobaXterm/secureCRT 等终端均支持) */ rt_kprintf("\033[2J\033[H"); /* ---- 头部:时间 ---- */ now = time(RT_NULL); tm_buf = *localtime(&now); rt_kprintf("================ 系统监控 [q:退出] ================\n"); rt_kprintf("时间: %04d-%02d-%02d %02d:%02d:%02d\n", tm_buf.tm_year + 1900, tm_buf.tm_mon + 1, tm_buf.tm_mday, tm_buf.tm_hour, tm_buf.tm_min, tm_buf.tm_sec); /* ---- CPU ---- */ total_sec = (rt_uint32_t)(rt_tick_get() / RT_TICK_PER_SECOND); system_status.system_uptime = total_sec; system_status.cpu_usage = (int)cpu_load_average(); if(system_status.cpu_usage > system_status.cpu_usage_max) { system_status.cpu_usage_max = system_status.cpu_usage; } system_status.cpu_tempture = (int)Get_Temprate()/100; rt_kprintf("[CPU] 利用率:%d%% (峰值:%d%%) 温度:%dC 运行:%d时%d分%d秒\n", system_status.cpu_usage, system_status.cpu_usage_max, system_status.cpu_tempture, total_sec / 3600, (total_sec % 3600) / 60, total_sec % 60); /* ---- RAM(堆) ---- */ rt_memory_info(&total, &used, &max_used); if (total > 0) { rt_kprintf("[RAM] 已用:%u.%uKB / %uKB (%u%%) 峰值:%u.%uKB\n", (unsigned)(used / 1024), (unsigned)((used % 1024) * 10 / 1024), (unsigned)(total / 1024), (unsigned)(used * 100 / total), (unsigned)(max_used / 1024), (unsigned)((max_used % 1024) * 10 / 1024)); } else { rt_kprintf("[RAM] 堆信息不可用\n"); } /* ---- 外部 Flash 参数(SFUD) ---- */ nor = rt_sfud_flash_find_by_dev_name(FAL_USING_NOR_FLASH_DEV_NAME); if (nor != RT_NULL) { rt_kprintf("[Flash] 外部:%s %s 容量:%uKB 擦除:%uB JEDEC:%02X-%02X-%02X\n", nor->name, nor->chip.name, (unsigned)(nor->chip.capacity / 1024), (unsigned)(nor->chip.erase_gran), nor->chip.mf_id, nor->chip.type_id, nor->chip.capacity_id); } else { rt_kprintf("[Flash] 外部:%s 未找到(未初始化?)\n", FAL_USING_NOR_FLASH_DEV_NAME); } onchip = fal_flash_device_find("onchip_flash"); if (onchip != RT_NULL) { rt_kprintf(" 片内:%s 容量:%uKB 块:%uKB\n", onchip->name, (unsigned)(onchip->len / 1024), (unsigned)(onchip->blk_size / 1024)); } /* ---- FAL 分区表(外部 Flash 使用分布) ---- */ part_table = fal_get_partition_table(&part_num); if (part_table != RT_NULL) { for (i = 0; i < (int)part_num; i++) { rt_kprintf("%s %-9s @%-13s 起址:%6uK 大小:%5uK\n", (i == 0) ? "[分区]" : " ", part_table[i].name, part_table[i].flash_name, (unsigned)(part_table[i].offset / 1024), (unsigned)(part_table[i].len / 1024)); } } /* ---- 数据上报进度 ---- */ rt_kprintf("[上报] 距下次上传:%us (间隔:%umin) 累计上传:%u 次 RTU: rx:%u tx:%u B\n", (unsigned)device_status.num_updata, (unsigned)device_status.dattim, (unsigned)system_status.json_upload_count, (unsigned)system_status.uart2_rx_bytes, (unsigned)system_status.uart2_tx_bytes); /* ---- 工作状态与进度 ---- */ rt_kprintf("[工作] 状态:%s [开关机]:%s workdone:%d | 收集[%s]:%umin 加热[%s]:%dmin | 光:%d 雨:%d 温:%d 欠压:%d\n", (device_status.work_status == 1) ? "工作中" : "待机", (device_status.ds == 1) ? "开机" : "关机", device_status.work_done, (device_status.collt_status == 1) ? "开" : "关", device_status.clt_time, (device_status.heat_status == 1) ? "开" : "关", device_status.heattime, device_status.sun_status, device_status.rain_status, device_status.temp_status, device_status.bat_status); /* ---- 外设(关键设备的打开状态) ---- */ { static const char *dev_names[] = {"uart1", "uart2", "uart4", "uart5", "adc1", "wdt", "rtc", "spi10"}; rt_kprintf("[外设] "); for (i = 0; i < (int)(sizeof(dev_names) / sizeof(dev_names[0])); i++) { rt_device_t dev = rt_device_find(dev_names[i]); if (dev == RT_NULL) { rt_kprintf("%s:NA ", dev_names[i]); } else { rt_kprintf("%s:%s ", dev_names[i], (dev->ref_count > 0) ? "开" : "关"); } } rt_kprintf("\n"); } /* ---- 通信与报警状态 ---- */ rt_kprintf("[状态] net:%s csq:%s sim:%s | 485:%d RTU启动:%d |[报警] 相机:%d 加热:%d 补光:%d\n", device_status.net, device_status.csq, device_status.sim, device_status.sensor_485_sta, device_status.rtu_isboot, device_status.camsta, device_status.heat_sta, device_status.led_sta); /* ---- 动作统计 ---- */ rt_kprintf("[统计] 拍照:%u 清扫:%u 震动:%u | 仓门 上开:%u |上关:%u |下开:%u | 下关:%u\n", (unsigned)system_status.photo_taken_count, (unsigned)system_status.cleaning_count, (unsigned)system_status.vibration_count, (unsigned)system_status.upper_door_open_count, (unsigned)system_status.upper_door_close_count, (unsigned)system_status.lower_door_open_count, (unsigned)system_status.lower_door_close_count); /* ---- 线程状态(复用内核 list_thread 输出) ---- */ rt_kprintf("[线程]\n"); list_thread(); rt_kprintf("========== top [间隔秒] [次数] 刷新, 按 q 或 Ctrl+C 退出 ==========\n"); } /* 检查控制台是否收到退出按键(q/Q/Ctrl+C)。 * 串口 INT_RX 模式下 rt_device_read 为非阻塞:无数据时返回 0,可直接轮询。 * 返回 1 表示请求退出;顺带丢弃其它按键,避免残留字符干扰后续 shell 输入。 */ static int sys_mon_exit_key(void) { rt_device_t console = rt_console_get_device(); char ch; if (console == RT_NULL) { return 0; } while (rt_device_read(console, 0, &ch, 1) == 1) { if (ch == 'q' || ch == 'Q' || ch == 0x03) /* 0x03 = Ctrl+C */ { return 1; } } return 0; } /* 控制台命令:top 式系统监控,持续刷新显示。 * 用法:Msh_DisplaySysMonitor [刷新间隔秒 1-60,默认1] [刷新次数,省略/0=持续刷新] * 持续刷新模式下按 q(或 Ctrl+C)退出。别名:top * 示例:top —— 每 1 秒刷新,q 退出 * top 5 —— 每 5 秒刷新,q 退出 * top 2 30 —— 每 2 秒刷新,共 30 次后自动退出 */ void Msh_DisplaySysMonitor(int argc, char **argv) { int interval = SYS_MON_DEF_INTERVAL_SEC; int times = 0; /* 0=持续刷新 */ int count = 0; int exited = 0; if (argc >= 2) { interval = atoi(argv[1]); if (interval < 1) interval = 1; if (interval > SYS_MON_MAX_INTERVAL_SEC) interval = SYS_MON_MAX_INTERVAL_SEC; } if (argc >= 3) { times = atoi(argv[2]); if (times < 0) times = 0; } while (1) { sys_mon_show_screen(); count++; if (times > 0 && count >= times) { break; } /* 等待下一个刷新点:分片等待,期间检查退出按键 */ { int waited = 0; int total_ms = interval * 1000; while (waited < total_ms) { int step = SYS_MON_KEY_SLICE_MS; if ((total_ms - waited) < step) { step = total_ms - waited; } rt_thread_mdelay(step); waited += step; if (sys_mon_exit_key()) { exited = 1; break; } } } if (exited) { break; } } rt_kprintf("系统监控已退出.\n"); } MSH_CMD_EXPORT(Msh_DisplaySysMonitor, system monitor (top style): [interval_s] [count]); MSH_CMD_EXPORT_ALIAS(Msh_DisplaySysMonitor, top, system monitor (top style));