| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132 |
- #include "bsp_date.h"
- #define FEBRUARY 2
- #define STARTOFTIME 1970
- #define SECDAY 86400L /* 一天有多少s */
- #define SECYR (SECDAY * 365)
- #define leapyear(year) ((year) % 4 == 0)
- #define days_in_year(a) (leapyear(a) ? 366 : 365)
- #define days_in_month(a) (month_days[(a) - 1])
- static int month_days[12] = { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
- /*
- * This only works for the Gregorian calendar - i.e. after 1752 (in the UK)
- */
- /*计算公历*/
- void GregorianDay(struct rtc_time * tm)
- {
- int leapsToDate;
- int lastYear;
- int day;
- int MonthOffset[] = { 0,31,59,90,120,151,181,212,243,273,304,334 };
- lastYear=tm->tm_year-1;
- /*计算从公元元年到计数的前一年之中一共经历了多少个闰年*/
- leapsToDate = lastYear/4 - lastYear/100 + lastYear/400;
- /*如若计数的这一年为闰年,且计数的月份在2月之后,则日数加1,否则不加1*/
- if((tm->tm_year%4==0) &&
- ((tm->tm_year%100!=0) || (tm->tm_year%400==0)) &&
- (tm->tm_mon>2)) {
- /*
- * We are past Feb. 29 in a leap year
- */
- day=1;
- } else {
- day=0;
- }
- day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] + tm->tm_mday; /*计算从公元元年元旦到计数日期一共有多少天*/
- tm->tm_wday=day%7;
- }
- /* Converts Gregorian date to seconds since 1970-01-01 00:00:00.
- * Assumes input in normal date format, i.e. 1980-12-31 23:59:59
- * => year=1980, mon=12, day=31, hour=23, min=59, sec=59.
- *
- * [For the Julian calendar (which was used in Russia before 1917,
- * Britain & colonies before 1752, anywhere else before 1582,
- * and is still in use by some communities) leave out the
- * -year/100+year/400 terms, and add 10.]
- *
- * This algorithm was first published by Gauss (I think).
- *
- * WARNING: this function will overflow on 2106-02-07 06:28:16 on
- * machines were long is 32-bit! (However, as time_t is signed, we
- * will already get problems at other places on 2038-01-19 03:14:08)
- *ADD by fire:本函数在工程中的输入参数为北京时间,
- 所以在转换成时间戳时最后要从北京时间转换为标准时间的时间戳
- */
- uint32_t mktimev(struct rtc_time *tm)
- {
- // if (0 >= (int) (tm->tm_mon -= 2)) { /* 1..12 -> 11,12,1..10 */
- // tm->tm_mon += 12; /* Puts Feb last since it has leap day */
- // tm->tm_year -= 1;
- // }
- //
- // return (((
- // (uint32_t) (tm->tm_year/4 - tm->tm_year/100 + tm->tm_year/400 + 367*tm->tm_mon/12 + tm->tm_mday) +
- // tm->tm_year*365 - 719499
- // )*24 + tm->tm_hour /* now have hours */
- // )*60 + tm->tm_min /* now have minutes */
- // )*60 + tm->tm_sec-8*60*60; /* finally seconds */
- // /*Add by fire: -8*60*60 把输入的北京时间转换为标准时间,
- // 再写入计时器中,确保计时器的数据为标准的UNIX时间戳*/
- // return (uint32_t)(
- // tm->tm_year * 31536000 +
- // tm->tm_mon *
- // );
- return 0;
- }
- void to_tm(uint32_t tim, struct rtc_time * tm)
- {
- register uint32_t i;
- register long hms, day;
- day = tim / SECDAY; /* 有多少天 */
- hms = tim % SECDAY; /* 今天的时间,单位s */
- /* Hours, minutes, seconds are easy */
- tm->tm_hour = hms / 3600;
- tm->tm_min = (hms % 3600) / 60;
- tm->tm_sec = (hms % 3600) % 60;
- /* Number of years in days */ /*算出当前年份,起始的计数年份为1970年*/
- for (i = STARTOFTIME; day >= days_in_year(i); i++) {
- day -= days_in_year(i);
- }
- tm->tm_year = i;
- /* Number of months in days left */ /*计算当前的月份*/
- if (leapyear(tm->tm_year)) {
- days_in_month(FEBRUARY) = 29;
- }
- for (i = 1; day >= days_in_month(i); i++) {
- day -= days_in_month(i);
- }
- days_in_month(FEBRUARY) = 28;
- tm->tm_mon = i;
- /* Days are what is left over (+1) from all that. *//*计算当前日期*/
- tm->tm_mday = day + 1;
- /*
- * Determine the day of week
- */
- GregorianDay(tm);
- }
|