board.h 14 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378
  1. /*
  2. * Copyright (c) 2006-2024, RT-Thread Development Team
  3. *
  4. * SPDX-License-Identifier: Apache-2.0
  5. *
  6. * Change Logs:
  7. * Date Author Notes
  8. * 2024-11-07 RealThread first version
  9. */
  10. #ifndef __BOARD_H__
  11. #define __BOARD_H__
  12. #include <stm32f4xx.h>
  13. #include <drv_common.h>
  14. #ifdef __cplusplus
  15. extern "C"
  16. {
  17. #endif
  18. /*-------------------------- CHIP CONFIG BEGIN --------------------------*/
  19. #define CHIP_FAMILY_STM32
  20. #define CHIP_SERIES_STM32F4
  21. #define CHIP_NAME_STM32F407VE
  22. /*-------------------------- CHIP CONFIG END --------------------------*/
  23. /*-------------------------- ROM/RAM CONFIG BEGIN --------------------------*/
  24. #define ROM_START ((uint32_t)0x08000000)
  25. #define ROM_SIZE (1024 * 1024)
  26. #define ROM_END ((uint32_t)(ROM_START + ROM_SIZE))
  27. #define RAM_START (0x20000000)
  28. #define RAM_SIZE (128 * 1024)
  29. #define RAM_END (RAM_START + RAM_SIZE)
  30. /*-------------------------- ROM/RAM CONFIG END --------------------------*/
  31. /*-------------------------- CLOCK CONFIG BEGIN --------------------------*/
  32. #define BSP_CLOCK_SOURCE ("HSE")
  33. #define BSP_CLOCK_SOURCE_FREQ_MHZ ((int32_t)12)
  34. #define BSP_CLOCK_SYSTEM_FREQ_MHZ ((int32_t)168)
  35. /*-------------------------- CLOCK CONFIG END --------------------------*/
  36. /*-------------------------- UART CONFIG BEGIN --------------------------*/
  37. /** After configuring corresponding UART or UART DMA, you can use it.
  38. *
  39. * STEP 1, define macro define related to the serial port opening based on the serial port number
  40. * such as #define BSP_USING_UART1
  41. *
  42. * STEP 2, according to the corresponding pin of serial port, define the related serial port information macro
  43. * such as #define BSP_UART1_TX_PIN "PA9"
  44. * #define BSP_UART1_RX_PIN "PA10"
  45. *
  46. * STEP 3, if you want using SERIAL DMA, you must open it in the RT-Thread Settings.
  47. * RT-Thread Setting -> Components -> Device Drivers -> Serial Device Drivers -> Enable Serial DMA Mode
  48. *
  49. * STEP 4, according to serial port number to define serial port tx/rx DMA function in the board.h file
  50. * such as #define BSP_UART1_RX_USING_DMA
  51. *
  52. */
  53. #define BSP_USING_UART1
  54. #define BSP_UART1_TX_PIN "PA9"
  55. #define BSP_UART1_RX_PIN "PA10"
  56. #define BSP_USING_UART4
  57. #define BSP_UART4_RX_USING_DMA
  58. #define BSP_UART4_TX_PIN "PC10"
  59. #define BSP_UART4_RX_PIN "PC11"
  60. /*-------------------------- UART CONFIG END --------------------------*/
  61. /*-------------------------- I2C CONFIG BEGIN --------------------------*/
  62. /** if you want to use i2c bus(soft simulate) you can use the following instructions.
  63. *
  64. * STEP 1, open i2c driver framework(soft simulate) support in the RT-Thread Settings file
  65. *
  66. * STEP 2, define macro related to the i2c bus
  67. * such as #define BSP_USING_I2C1
  68. *
  69. * STEP 3, according to the corresponding pin of i2c port, modify the related i2c port and pin information
  70. * such as #define BSP_I2C1_SCL_PIN GET_PIN(port, pin) -> GET_PIN(C, 11)
  71. * #define BSP_I2C1_SDA_PIN GET_PIN(port, pin) -> GET_PIN(C, 12)
  72. */
  73. /*#define BSP_USING_I2C1*/
  74. #ifdef BSP_USING_I2C1
  75. #define BSP_I2C1_SCL_PIN GET_PIN(port, pin)
  76. #define BSP_I2C1_SDA_PIN GET_PIN(port, pin)
  77. #endif
  78. /*#define BSP_USING_I2C2*/
  79. #ifdef BSP_USING_I2C2
  80. #define BSP_I2C2_SCL_PIN GET_PIN(port, pin)
  81. #define BSP_I2C2_SDA_PIN GET_PIN(port, pin)
  82. #endif
  83. /*-------------------------- I2C CONFIG END --------------------------*/
  84. /*-------------------------- SPI CONFIG BEGIN --------------------------*/
  85. /** if you want to use spi bus you can use the following instructions.
  86. *
  87. * STEP 1, open spi driver framework support in the RT-Thread Settings file
  88. *
  89. * STEP 2, define macro related to the spi bus
  90. * such as #define BSP_USING_SPI1
  91. *
  92. * STEP 3, copy your spi init function from stm32xxxx_hal_msp.c generated by stm32cubemx to the end of board.c file
  93. * such as void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
  94. *
  95. * STEP 4, modify your stm32xxxx_hal_config.h file to support spi peripherals. define macro related to the peripherals
  96. * such as #define HAL_SPI_MODULE_ENABLED
  97. */
  98. /*#define BSP_USING_SPI1*/
  99. #define BSP_USING_SPI2
  100. /*#define BSP_USING_SPI3*/
  101. /*-------------------------- SPI CONFIG END --------------------------*/
  102. /*-------------------------- QSPI CONFIG BEGIN --------------------------*/
  103. /** if you want to use qspi you can use the following instructions.
  104. *
  105. * STEP 1, open qspi driver framework support in the RT-Thread Settings file
  106. *
  107. * STEP 2, define macro related to the qspi
  108. * such as #define BSP_USING_QSPI
  109. *
  110. * STEP 3, copy your qspi init function from stm32xxxx_hal_msp.c generated by stm32cubemx to the end of board.c file
  111. * such as void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi)
  112. *
  113. * STEP 4, modify your stm32xxxx_hal_config.h file to support qspi peripherals. define macro related to the peripherals
  114. * such as #define HAL_QSPI_MODULE_ENABLED
  115. *
  116. */
  117. /*#define BSP_USING_QSPI*/
  118. /*-------------------------- QSPI CONFIG END --------------------------*/
  119. /*-------------------------- PWM CONFIG BEGIN --------------------------*/
  120. /** if you want to use pwm you can use the following instructions.
  121. *
  122. * STEP 1, open pwm driver framework support in the RT-Thread Settings file
  123. *
  124. * STEP 2, define macro related to the pwm
  125. * such as #define BSP_USING_PWM1
  126. *
  127. * STEP 3, copy your pwm timer init function from stm32xxxx_hal_msp.c generated by stm32cubemx to the end if board.c file
  128. * such as void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base) and
  129. * void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
  130. *
  131. * STEP 4, modify your stm32xxxx_hal_config.h file to support pwm peripherals. define macro related to the peripherals
  132. * such as #define HAL_TIM_MODULE_ENABLED
  133. *
  134. */
  135. /*#define BSP_USING_PWM1*/
  136. /*#define BSP_USING_PWM2*/
  137. /*#define BSP_USING_PWM3*/
  138. /*-------------------------- PWM CONFIG END --------------------------*/
  139. /*-------------------------- ADC CONFIG BEGIN --------------------------*/
  140. /** if you want to use adc you can use the following instructions.
  141. *
  142. * STEP 1, open adc driver framework support in the RT-Thread Settings file
  143. *
  144. * STEP 2, define macro related to the adc
  145. * such as #define BSP_USING_ADC1
  146. *
  147. * STEP 3, copy your adc init function from stm32xxxx_hal_msp.c generated by stm32cubemx to the end of board.c file
  148. * such as void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
  149. *
  150. * STEP 4, modify your stm32xxxx_hal_config.h file to support adc peripherals. define macro related to the peripherals
  151. * such as #define HAL_ADC_MODULE_ENABLED
  152. *
  153. */
  154. /*#define BSP_USING_ADC1*/
  155. /*#define BSP_USING_ADC2*/
  156. /*#define BSP_USING_ADC3*/
  157. /*-------------------------- ADC CONFIG END --------------------------*/
  158. /*-------------------------- WDT CONFIG BEGIN --------------------------*/
  159. /** if you want to use wdt you can use the following instructions.
  160. *
  161. * STEP 1, open wdt driver framework support in the RT-Thread Settings file
  162. *
  163. * STEP 2, modify your stm32xxxx_hal_config.h file to support wdt peripherals. define macro related to the peripherals
  164. * such as #define HAL_IWDG_MODULE_ENABLED
  165. *
  166. */
  167. /*-------------------------- WDT CONFIG END --------------------------*/
  168. /*-------------------------- HARDWARE TIMER CONFIG BEGIN --------------------------*/
  169. /** if you want to use hardware timer you can use the following instructions.
  170. *
  171. * STEP 1, open hwtimer driver framework support in the RT-Thread Settings file
  172. *
  173. * STEP 2, define macro related to the hwtimer
  174. * such as #define BSP_USING_TIM and
  175. * #define BSP_USING_TIM1
  176. *
  177. * STEP 3, copy your hardwire timer init function from stm32xxxx_hal_msp.c generated by stm32cubemx to the end of board.c file
  178. * such as void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
  179. *
  180. * STEP 4, modify your stm32xxxx_hal_config.h file to support hardwere timer peripherals. define macro related to the peripherals
  181. * such as #define HAL_TIM_MODULE_ENABLED
  182. *
  183. */
  184. /*#define BSP_USING_TIM*/
  185. #ifdef BSP_USING_TIM
  186. /*#define BSP_USING_TIM15*/
  187. /*#define BSP_USING_TIM16*/
  188. /*#define BSP_USING_TIM17*/
  189. #endif
  190. /*-------------------------- HAREWARE TIMER CONFIG END --------------------------*/
  191. /*-------------------------- RTC CONFIG BEGIN --------------------------*/
  192. /** if you want to use rtc(hardware) you can use the following instructions.
  193. *
  194. * STEP 1, open rtc driver framework(hardware) support in the RT-Thread Settings file
  195. *
  196. * STEP 2, define macro related to the rtc
  197. * such as BSP_USING_ONCHIP_RTC
  198. *
  199. * STEP 3, modify your stm32xxxx_hal_config.h file to support rtc peripherals. define macro related to the peripherals
  200. * such as #define HAL_RTC_MODULE_ENABLED
  201. *
  202. */
  203. #define BSP_USING_ONCHIP_RTC
  204. /*-------------------------- RTC CONFIG END --------------------------*/
  205. /*-------------------------- SDIO CONFIG BEGIN --------------------------*/
  206. /** if you want to use sdio you can use the following instructions.
  207. *
  208. * STEP 1, open sdio driver framework support in the RT-Thread Settings file
  209. *
  210. * STEP 2, define macro related to the sdio
  211. * such as BSP_USING_SDIO
  212. *
  213. * STEP 3, copy your sdio init function from stm32xxxx_hal_msp.c generated by stm32cubemx to the end of board.c file
  214. * such as void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
  215. *
  216. * STEP 4, modify your stm32xxxx_hal_config.h file to support sdio peripherals. define macro related to the peripherals
  217. * such as #define HAL_SD_MODULE_ENABLED
  218. *
  219. * STEP 5, config your device file system or another applications
  220. *
  221. */
  222. /*#define BSP_USING_SDIO*/
  223. /*-------------------------- SDIO CONFIG END --------------------------*/
  224. /*-------------------------- ETH CONFIG BEGIN --------------------------*/
  225. /** if you want to use eth you can use the following instructions.
  226. *
  227. * STEP 1, define macro related to the eth
  228. * such as BSP_USING_ETH
  229. *
  230. * STEP 2, copy your eth init function from stm32xxxx_hal_msp.c generated by stm32cubemx to the end if board.c file
  231. * such as void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
  232. *
  233. * STEP 3, modify your stm32xxxx_hal_config.h file to support eth peripherals. define macro related to the peripherals
  234. * such as #define HAL_ETH_MODULE_ENABLED
  235. *
  236. * STEP 4, config your phy type
  237. * such as #define PHY_USING_LAN8720A
  238. * #define PHY_USING_DM9161CEP
  239. * #define PHY_USING_DP83848C
  240. * STEP 5, implement your phy reset function in the end of board.c file
  241. * void phy_reset(void)
  242. *
  243. * STEP 6, config your lwip or other network stack
  244. *
  245. */
  246. /*#define BSP_USING_ETH*/
  247. #ifdef BSP_USING_ETH
  248. /*#define PHY_USING_LAN8720A*/
  249. /*#define PHY_USING_DM9161CEP*/
  250. /*#define PHY_USING_DP83848C*/
  251. #endif
  252. /*-------------------------- ETH CONFIG END --------------------------*/
  253. /*-------------------------- USB HOST CONFIG BEGIN --------------------------*/
  254. /** if you want to use usb host you can use the following instructions.
  255. *
  256. * STEP 1, open usb host driver framework support in the RT-Thread Settings file
  257. *
  258. * STEP 2, define macro related to the usb host
  259. * such as BSP_USING_USBHOST
  260. *
  261. * STEP 3, copy your usb host init function from stm32xxxx_hal_msp.c generated by stm32cubemx to the end of board.c file
  262. * such as void HAL_HCD_MspInit(HCD_HandleTypeDef* hhcd)
  263. *
  264. * STEP 4, config your usb peripheral clock in SystemClock_Config() generated by STM32CubeMX and replace this function in board.c
  265. *
  266. * STEP 5, modify your stm32xxxx_hal_config.h file to support usb host peripherals. define macro related to the peripherals
  267. * such as #define HAL_HCD_MODULE_ENABLED
  268. *
  269. */
  270. /*#define BSP_USING_USBHOST*/
  271. /*-------------------------- USB HOST CONFIG END --------------------------*/
  272. /*-------------------------- USB DEVICE CONFIG BEGIN --------------------------*/
  273. /** if you want to use usb device you can use the following instructions.
  274. *
  275. * STEP 1, open usb device driver framework support in the RT-Thread Settings file
  276. *
  277. * STEP 2 define macro related to the usb device
  278. * such as BSP_USING_USBDEVICE
  279. *
  280. * STEP 3, copy your usb device init function from stm32xxxx_hal_msp.c generated by stm32cubemx to the end of board.c file
  281. * such as void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd)
  282. *
  283. * STEP 4, config your usb peripheral clock in SystemClock_Config() generated by STM32CubeMX and replace this function in board.c
  284. *
  285. * STEP 5, modify your stm32xxxx_hal_config.h file to support usb device peripherals. define macro related to the peripherals
  286. * such as #define HAL_PCD_MODULE_ENABLED
  287. *
  288. */
  289. /*#define BSP_USING_USBDEVICE*/
  290. /*-------------------------- USB DEVICE CONFIG END --------------------------*/
  291. /*-------------------------- ON_CHIP_FLASH CONFIG BEGIN --------------------------*/
  292. /** if you want to use on chip flash you can use the following instructions.
  293. *
  294. * STEP 1 define macro related to the on chip flash
  295. * such as BSP_USING_ON_CHIP_FLASH
  296. *
  297. * STEP 2, modify your stm32xxxx_hal_config.h file to support on chip flash peripherals. define macro related to the peripherals
  298. * such as #define HAL_FLASH_MODULE_ENABLED
  299. *
  300. */
  301. //#define BSP_USING_ON_CHIP_FLASH
  302. /*-------------------------- ON_CHIP_FLASH CONFIG END --------------------------*/
  303. #ifdef __cplusplus
  304. }
  305. #endif
  306. #endif /* __BOARD_H__ */