sht30_collect.c 22 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677
  1. /*
  2. * Copyright (c) 2006-2020, RT-Thread Development Team
  3. *
  4. * SPDX-License-Identifier: Apache-2.0
  5. *
  6. * Change Logs:
  7. * Date Author Notes
  8. * 2020-05-23 Administrator the first version
  9. */
  10. #include <rtthread.h>
  11. #include <board.h>
  12. #include <sht3x.h>
  13. #include "sht30_collect.h"
  14. #include <string.h>
  15. #include <stdio.h>
  16. #include "control.h"
  17. #include "hmi.h"
  18. #include "math.h"
  19. #include "test.h"
  20. #define DBG_ENABLE
  21. #define DBG_COLOR
  22. #define DBG_TAG "control"
  23. #define DBG_LEVEL DBG_LOG
  24. #include <rtdbg.h> //must after of DBG_LVL, DBG_TAG or other options
  25. // 温湿度
  26. #define THREAD_PRIORITY 21 // 线程优先级
  27. #define THREAD_STACK_SIZE 1024 // 栈大小
  28. #define THREAD_TIMESLICE 5 // 时间片
  29. // 电压,电流
  30. #define P_THREAD_PRIORITY 13 // 线程优先级
  31. #define P_THREAD_STACK_SIZE 1024 // 栈大小
  32. #define P_THREAD_TIMESCLICE 5 // 时间片
  33. // ADC
  34. #define ADC_DEV_NAME "adc1" /*ADC设备名称*/
  35. #define ADC_DEV_CHANNLE_0 0 /*ADC通道*/ // 电压
  36. #define ADC_DEV_CHANNLE_1 1 /*ADC通道*/ // 电流
  37. #define ADC_DEV_CHANNLE_2 10 /*光控*/
  38. #define ADC_DEV_CHANNLE_3 11 /*雨控*/ // 现在只有一个adc 给雨控用吧 小虫体可以用光照度传感器
  39. #define ADC_DEV_CHANNLE_4 12 /*加热仓温度*/
  40. #define ADC_DEV_CHANNLE_5 13 /*保险丝之后的电压*/
  41. #define ADC_DEV_CHANNLE_6 16 /*内部温度传感器*/
  42. #define REFER_VOLTAGE 330 /* 参考电压 3.3V,数据精度乘以100保留2位小数*/
  43. #define CONVERT_BITS (1 << 12) /* 转换位数为12位 */
  44. Device_Status_typedef device_status;
  45. rt_device_t serial_485; /*串口设备句柄*/
  46. struct serial_configure uart_config_485 = RT_SERIAL_CONFIG_DEFAULT; /*初始化配置参数*/
  47. rt_uint32_t adc0_value, adc1_value, in_adc_17, adc13_value, adc16_value;
  48. rt_uint32_t adc10_rain, adc11_light, adc12_ntc;
  49. int8_t hum_value, tem_value;
  50. static rt_thread_t tid1 = RT_NULL;
  51. static rt_thread_t tid2 = RT_NULL;
  52. ADC_HandleTypeDef hadc1;
  53. int32_t Read_Filtered_Current(void);
  54. /*串口初始化*/
  55. int UART_485_INIT(void)
  56. {
  57. serial_485 = rt_device_find(UART_485);
  58. /*修改串口配置参数*/
  59. uart_config_485.baud_rate = BAUD_RATE_9600; // 修改波特率9600
  60. uart_config_485.data_bits = DATA_BITS_8; // 数据位8
  61. uart_config_485.stop_bits = STOP_BITS_1; // 停止位1
  62. uart_config_485.bufsz = 512; // 缓冲区1k
  63. uart_config_485.parity = PARITY_NONE; // 奇校验
  64. /* step3:控制串口设备。通过控制接口传入命令控制字,与控制参数 */
  65. rt_device_control(serial_485, RT_DEVICE_CTRL_CONFIG, &uart_config_485);
  66. /* step4:打开串口设备。以DMA接收及轮询发送模式打开串口设备 */
  67. rt_device_open(serial_485, RT_DEVICE_FLAG_INT_RX);
  68. return 0;
  69. }
  70. /* 入口函数 */
  71. static void sht30_collect_thread_entry(void *parameter)
  72. {
  73. sht3x_device_t sht3x_device;
  74. static int checklightnum = 0;
  75. static int checknightnum = 0;
  76. sht3x_device = sht3x_init("i2c1", 0x44);
  77. // 此处需要短暂的延时,否则会出现连续读取失败的问题
  78. rt_thread_mdelay(150);
  79. uint16_t log_en_inr = 30; // 打印log的速度 数值越小 打印越频繁
  80. static int16_t log_en_cnt = -1;
  81. while (1)
  82. {
  83. if (sht3x_device)
  84. {
  85. if (RT_EOK == sht3x_read_singleshot(sht3x_device))
  86. {
  87. hum_value = sht3x_device->humidity;
  88. tem_value = sht3x_device->temperature;
  89. if (hum_value != 0)
  90. {
  91. rt_sprintf(device_status.humidity, "%d.%d", (int)sht3x_device->humidity, (uint)(sht3x_device->humidity * 10) % 10);
  92. rt_sprintf(device_status.tempture, "%d.%d", (int)sht3x_device->temperature, (uint)(sht3x_device->temperature * 10) % 10);
  93. }
  94. else
  95. {
  96. rt_kprintf("sht3x_read_singleshot eRR:%d", hum_value);
  97. }
  98. }
  99. else
  100. {
  101. sht3x_softreset(sht3x_device);
  102. }
  103. //// rt_kprintf("sht30 humidity : %d.%d ", (int)sht3x_device->humidity, (int)(sht3x_device->humidity * 10) % 10);
  104. //// rt_kprintf("temperature: %d.%d\n", (int)sht3x_device->temperature, (int)(sht3x_device->temperature * 10) % 10);
  105. }
  106. else
  107. {
  108. rt_kprintf("read sht3x fail.\r\n");
  109. // 重新初始化
  110. sht3x_deinit(sht3x_device);
  111. sht3x_device = sht3x_init("i2c1", 0x44);
  112. rt_thread_mdelay(150);
  113. }
  114. // if (Read_Light_Voltage() > 500)
  115. // {
  116. // checklightnum++;
  117. // if (checklightnum == 20)
  118. // {
  119. // device_status.sun_status = 1;
  120. // checklightnum = 0;
  121. // }
  122. // }
  123. // else
  124. // {
  125. // checknightnum++;
  126. // if (checknightnum == 20)
  127. // {
  128. // device_status.sun_status = 0;
  129. // checknightnum = 0;
  130. // }
  131. // }
  132. // 温控
  133. // if (atoi(device_status.tempture) >= device_status.tph || atoi(device_status.tempture) <= device_status.tpl)
  134. // {
  135. // device_status.temp_status = 1;
  136. // }
  137. // else if (atoi(device_status.tempture) >= (device_status.tpl + 5) && atoi(device_status.tempture) <= (device_status.tph - 10))
  138. // {
  139. // device_status.temp_status = 0;
  140. // }
  141. if (chk_log_time)
  142. {
  143. LOG_I("光控计数:%d-%d", checklightnum, checknightnum);
  144. }
  145. rt_thread_mdelay(5000);
  146. }
  147. }
  148. /**
  149. * @brief 250411 适配新的电流采集芯片
  150. *
  151. */
  152. // 定义滑动平均滤波器结构体
  153. typedef struct
  154. {
  155. rt_uint16_t *buffer;
  156. int bufferSize;
  157. int currentIndex;
  158. rt_uint16_t sum;
  159. } MovingAverageFilter;
  160. // 初始化滑动平均滤波器
  161. MovingAverageFilter *moving_average_filter_init(int size)
  162. {
  163. MovingAverageFilter *filter = (MovingAverageFilter *)malloc(sizeof(MovingAverageFilter));
  164. if (filter == NULL)
  165. {
  166. return NULL;
  167. }
  168. filter->buffer = (rt_uint16_t *)calloc(size, sizeof(rt_uint16_t));
  169. if (filter->buffer == NULL)
  170. {
  171. free(filter);
  172. return NULL;
  173. }
  174. filter->bufferSize = size;
  175. filter->currentIndex = 0;
  176. filter->sum = 0.0;
  177. return filter;
  178. }
  179. // 更新滑动平均滤波器
  180. rt_uint16_t moving_average_filter_update(MovingAverageFilter *filter, rt_uint16_t newValue)
  181. {
  182. filter->sum -= filter->buffer[filter->currentIndex];
  183. filter->buffer[filter->currentIndex] = newValue;
  184. filter->sum += newValue;
  185. filter->currentIndex = (filter->currentIndex + 1) % filter->bufferSize;
  186. return filter->sum / filter->bufferSize;
  187. }
  188. // 释放滑动平均滤波器资源
  189. void moving_average_filter_free(MovingAverageFilter *filter)
  190. {
  191. if (filter != NULL)
  192. {
  193. free(filter->buffer);
  194. free(filter);
  195. }
  196. }
  197. /**
  198. * @brief 电流读取
  199. *
  200. * @param parameter
  201. */
  202. static void Power_ReadCheck(void *parameter)
  203. {
  204. int rain_cnt = 0;
  205. //int bat_cnt = 0;
  206. int RV;
  207. //MovingAverageFilter *filter = moving_average_filter_init(10);
  208. // MovingAverageFilter* filter_hi = moving_average_filter_init(10);
  209. MovingAverageFilter *filter_v = moving_average_filter_init(10);
  210. rt_thread_mdelay(1000);
  211. while (1)
  212. {
  213. //rt_kprintf("Read_Filtered_Current() > %d \n", Read_Filtered_Current());
  214. // #if PCB_V1 == 0
  215. // rt_uint16_t _24v_current_int = moving_average_filter_update(filter, Read_Real_Current());
  216. // if (_24v_current_int - 2430 > 0)
  217. // {
  218. // sprintf(device_status.power, "%.2f", (float)(_24v_current_int - 2430) / 0.4);
  219. // }
  220. // else
  221. // {
  222. // sprintf(device_status.power, "0.0");
  223. // }
  224. // #else
  225. // rt_uint16_t _24v_current_int = moving_average_filter_update(filter,Read_Real_Current());
  226. // sprintf(device_status.power,"%.2f",(float)_24v_current_int/10);
  227. sprintf(device_status.power, "%d", Read_Filtered_Current());
  228. // #endif
  229. //LOG_I("负载电流:%s", device_status.power);
  230. if ((Read_Real_Voltage() / 10) < 105) // 设备状态低于10.5 欠压保护 此处需要在屏幕明显位置进行提示
  231. {
  232. // 关闭外设
  233. // ctr_photo(OFF); // 关闭相机供电
  234. rt_kprintf("detact low volage %d.%d\n", Read_Real_Voltage() / 100, Read_Real_Voltage() % 100);
  235. // ctr_led(OFF); // 关闭补光灯
  236. device_status.bat_status = 0;
  237. }
  238. else
  239. {
  240. //rt_kprintf("Read_Real_Voltage() / 10 < 105 >>> %d \n" , Read_Real_Voltage() / 10);
  241. device_status.bat_status = 1;
  242. }
  243. RV = 10000 * (4096 - Read_Ntc_Voltage()) / Read_Ntc_Voltage();
  244. if (TempCalculate(RV, 3950, 10000) - TempCalculate(RV, 3950, 10000) > 10)
  245. {
  246. LOG_E("temp value err!!!!");
  247. }
  248. else
  249. {
  250. device_status.heattem = TempCalculate(RV, 3950, 10000);
  251. if (device_status.heattem > 160)
  252. {
  253. device_status.heattem = 25;
  254. }
  255. }
  256. // rt_kprintf("Read_Rain_Voltage > %d\n" , Read_Rain_Voltage());
  257. // 雨控
  258. if (Read_Rain_Voltage() > 250)
  259. {
  260. device_status.C01 |= (1 << 5);
  261. device_status.rain_status = 1;
  262. rain_cnt = 0;
  263. LOG_W("雨控状态触发\n"); // B115 删掉此处的雨控关灯逻辑
  264. }
  265. else if (device_status.rain_status)
  266. {
  267. rain_cnt++;
  268. if(Read_Rain_Voltage() < 250)
  269. {
  270. rain_cnt++;
  271. if(rain_cnt >= 60 * 4)
  272. {
  273. device_status.rain_status = 0;
  274. LOG_I("雨控状态恢复\n");
  275. rain_cnt = 0;
  276. }
  277. }
  278. else
  279. {
  280. rain_cnt = 0;
  281. }
  282. }
  283. // rt_sprintf(device_status.voltage,"%d.%02d",filter_voltage()/100,filter_voltage()%100);
  284. rt_uint16_t in_voltage_int = moving_average_filter_update(filter_v, Read_Real_Voltage());
  285. sprintf(device_status.voltage, "%d.%02d", in_voltage_int / 100, in_voltage_int % 100);
  286. // LOG_D("voltage is:%sV",device_status.voltage);
  287. sprintf(device_status.fuse_voltage, "%d.%02d", Read_Fuse_Voltage() / 100, Read_Fuse_Voltage() % 100);
  288. rt_thread_mdelay(10);
  289. }
  290. }
  291. /**
  292. * @brief 250411 适配新的电流采集芯片
  293. *
  294. */
  295. /**
  296. *
  297. * @return 250411 修改电流采集函数 过去的太为杂乱
  298. *
  299. *
  300. */
  301. // ADC参数
  302. #define ADC_MAX 4095u // 12位ADC最大值
  303. #define VREF_ADC_MV 3300 // ADC参考电压(单位:mV)
  304. #define DIVIDER_RATIO_NUM 2 // 分压比分子
  305. #define DIVIDER_RATIO_DEN 3 // 分压比分母
  306. // 传感器参数
  307. #define V_SUPPLY_MV 5100 // 传感器供电电压(单位:mV)// 先不要动这个
  308. #define V_OFFSET_MV (V_SUPPLY_MV / 2) // 零点电压(2755mV)
  309. #define SENSITIVITY_MA 100 // 灵敏度(0.1V/A → 100mV/A)
  310. //#define SENSITIVITY_MA 400 // 灵敏度(0.4V/A → 400mV/A,对应±5A) 若修改为5A芯片 用这个
  311. // 低通滤波参数(α=0.2,整数运算实现)
  312. #define FILTER_ALPHA 1 // α分子(α = 1/5 = 0.2)
  313. #define FILTER_BETA 4 // β分母(β = 1 - α = 4/5)
  314. // 250603 新
  315. // 硬件参数定义
  316. #define VCC 5000 // 电源电压5V (使用mV单位)
  317. #define ADC_REF 3300 // STM32 ADC参考电压3.3V (mV)
  318. #define ADC_RES 4095 // 12位ADC分辨率
  319. // 分压电阻参数 (放大1000倍避免浮点)
  320. #define R1 10000 // 10K上拉电阻
  321. #define R2 20000 // 20K下拉电阻
  322. #define RATIO_NUM (R1 + R2) // 分子
  323. #define RATIO_DEN R2 // 分母
  324. // 芯片选择(取消注释切换量程)
  325. #define CC6900_5A
  326. // #define CC6900_10A
  327. #ifdef CC6900_5A
  328. #define SENSITIVITY 400 // 5A芯片灵敏度(mV/A)
  329. #define CURRENT_RANGE 5000 // 5A量程(mA)
  330. #else
  331. #define SENSITIVITY 200 // 10A芯片灵敏度(mV/A)
  332. #define CURRENT_RANGE 10000 // 10A量程(mA)
  333. #endif
  334. // 精度放大因子 (Q10格式,放大1024倍)
  335. #define SCALE_FACTOR 1024
  336. /**
  337. * @brief 将ADC值转换为电流值(mA) - 定点数版本
  338. * @param adcValue ADC读取的原始值(0-4095)
  339. * @return 电流值(mA),正值表示正向电流,负值表示反向电流
  340. */
  341. int32_t ADC_to_Current_FixedPoint(uint16_t adcValue)
  342. {
  343. // rt_kprintf("adc >>> %d \n" , adcValue);
  344. // 1. 计算ADC电压 (mV) = adcValue * ADC_REF / ADC_RES
  345. uint32_t adcVoltage = ((uint32_t)adcValue * ADC_REF) / ADC_RES;
  346. // 2. 计算VOUT实际电压 (mV) = adcVoltage * (R1+R2)/R2
  347. uint32_t vout = (adcVoltage * RATIO_NUM) / RATIO_DEN;
  348. // 3. 计算相对于VCC/2的电压差 (mV)
  349. int32_t voltageDiff = (int32_t)vout - (VCC / 2);
  350. // 4. 计算电流 (mA) = (voltageDiff * 1000) / SENSITIVITY
  351. // 使用SCALE_FACTOR保持精度,最后再除回去
  352. int32_t current = (voltageDiff * 1000 * SCALE_FACTOR) / SENSITIVITY;
  353. // 5. 移除缩放因子并返回
  354. return current / SCALE_FACTOR;
  355. }
  356. // 250603 新
  357. /**
  358. * @brief 读取并滤波后的电流值(单位:mA,整数)
  359. * @return int32_t 滤波后的电流值
  360. */
  361. int32_t Read_Filtered_Current(void)
  362. {
  363. static int32_t filtered_current = 0; // 静态变量保存滤波结果
  364. // 1. 读取原始电流值
  365. int32_t raw_current = ADC_to_Current_FixedPoint(Read_Real_Current());
  366. // rt_kprintf("raw_current >>> %d \n" , raw_current);
  367. // 2. 一阶低通滤波(整数运算)
  368. // 公式:filtered = (α * raw + β * filtered_prev) / (α + β)
  369. filtered_current = (FILTER_ALPHA * raw_current + FILTER_BETA * filtered_current) /
  370. (FILTER_ALPHA + FILTER_BETA);
  371. filtered_current = abs(filtered_current);
  372. return filtered_current;
  373. }
  374. /*读取电流值*/
  375. int Read_Real_Current(void)
  376. {
  377. rt_adc_device_t adc_dev; /*ADC设备句柄*/
  378. adc_dev = (rt_adc_device_t)rt_device_find(ADC_DEV_NAME);
  379. if (adc_dev == RT_NULL)
  380. {
  381. LOG_E("adc sample run failed! can't find %s device!", ADC_DEV_NAME);
  382. return RT_ERROR; // adc 采样值不可能为负值,返回负值表示出错
  383. }
  384. HAL_ADCEx_Calibration_Start(adc_dev->parent.user_data);
  385. rt_adc_enable(adc_dev, ADC_DEV_CHANNLE_1);
  386. // rt_adc_enable(adc_dev, 17);
  387. adc1_value = filter_Mid(rt_adc_read(adc_dev, ADC_DEV_CHANNLE_1));
  388. in_adc_17 = filter_Mid(rt_adc_read(adc_dev, 17));
  389. /* 关闭通道 */
  390. rt_adc_disable(adc_dev, ADC_DEV_CHANNLE_1);
  391. // rt_adc_disable(adc_dev, 17);
  392. // rt_kprintf("read in adc:ADC17:%d-ADC1:%d\n",in_adc_17,adc1_value);
  393. return adc1_value;
  394. }
  395. /**
  396. *
  397. * @return 250411 修改电流采集函数 过去的太为杂乱
  398. *
  399. *
  400. */
  401. /*
  402. * https://blog.csdn.net/loop222/article/details/120497425
  403. 采样电阻0.01 Ω
  404. 运放为INA240A2,放大倍数50
  405. 背面需分别短接A0/A2至输出
  406. C1_OUT=INA_VCC/2 + 0.01 * I * 50
  407. 如果INA_VCC=3.3V,C1_OUT=1.65 + 0.01 * I * 50,电流范围(-3.3A,3.3A)
  408. 如果INA_VCC=5.0V,C1_OUT=2.50 + 0.01 * I * 50,电流范围(-5A,5A)
  409. B相采样输入在PCB上为走线方便做了反向输入,所以放大倍数需乘以 -1(移植后的代码已经做了处理)
  410. */
  411. /*读取电压值*/
  412. int Read_Real_Voltage(void)
  413. {
  414. rt_adc_device_t adc_dev; /*ADC设备句柄*/
  415. adc_dev = (rt_adc_device_t)rt_device_find(ADC_DEV_NAME);
  416. if (adc_dev == RT_NULL)
  417. {
  418. rt_kprintf("adc sample run failed! can't find %s device!\n", ADC_DEV_NAME);
  419. return RT_ERROR; // adc 采样值不可能为负值,返回负值表示出错
  420. }
  421. HAL_ADCEx_Calibration_Start(adc_dev->parent.user_data);
  422. rt_adc_enable(adc_dev, ADC_DEV_CHANNLE_0);
  423. // adc0_value = rt_adc_read(adc_dev, ADC_DEV_CHANNLE_0);
  424. adc0_value = filter_Mid(rt_adc_read(adc_dev, ADC_DEV_CHANNLE_0));
  425. /* 关闭通道 */
  426. rt_adc_disable(adc_dev, ADC_DEV_CHANNLE_0);
  427. return (adc0_value * REFER_VOLTAGE / CONVERT_BITS * 12 + 20);
  428. }
  429. /*读取保险丝的电压值*/
  430. int Read_Fuse_Voltage(void)
  431. {
  432. rt_adc_device_t adc_dev; /*ADC设备句柄*/
  433. adc_dev = (rt_adc_device_t)rt_device_find(ADC_DEV_NAME);
  434. if (adc_dev == RT_NULL)
  435. {
  436. rt_kprintf("adc sample run failed! can't find %s device!\n", ADC_DEV_NAME);
  437. return RT_ERROR; // adc 采样值不可能为负值,返回负值表示出错
  438. }
  439. HAL_ADCEx_Calibration_Start(adc_dev->parent.user_data);
  440. rt_adc_enable(adc_dev, ADC_DEV_CHANNLE_5);
  441. adc13_value = rt_adc_read(adc_dev, ADC_DEV_CHANNLE_5);
  442. /* 关闭通道 */
  443. rt_adc_disable(adc_dev, ADC_DEV_CHANNLE_5);
  444. return (adc13_value * REFER_VOLTAGE / CONVERT_BITS * 12 + 8);
  445. }
  446. /*读取雨控*/
  447. int Read_Rain_Voltage(void)
  448. {
  449. rt_adc_device_t adc_dev; /*ADC设备句柄*/
  450. adc_dev = (rt_adc_device_t)rt_device_find(ADC_DEV_NAME);
  451. if (adc_dev == RT_NULL)
  452. {
  453. rt_kprintf("adc sample run failed! can't find %s device!\n", ADC_DEV_NAME);
  454. return RT_ERROR; // adc 采样值不可能为负值,返回负值表示出错
  455. }
  456. rt_adc_enable(adc_dev, ADC_DEV_CHANNLE_3);
  457. adc11_light = rt_adc_read(adc_dev, ADC_DEV_CHANNLE_3);
  458. rt_adc_disable(adc_dev, ADC_DEV_CHANNLE_3);
  459. HAL_ADCEx_Calibration_Start(adc_dev->parent.user_data);
  460. // LOG_D("read rain value:%d",adc11_light);
  461. return adc11_light;
  462. // rt_pin_mode(RAIN_PIN,PIN_MODE_INPUT);
  463. // return rt_pin_read(RAIN_PIN);
  464. }
  465. /*读取光控*/
  466. int Read_Light_Voltage(void)
  467. {
  468. rt_adc_device_t adc_dev; /*ADC设备句柄*/
  469. adc_dev = (rt_adc_device_t)rt_device_find(ADC_DEV_NAME);
  470. if (adc_dev == RT_NULL)
  471. {
  472. rt_kprintf("adc sample run failed! can't find %s device!\n", ADC_DEV_NAME);
  473. return RT_ERROR; // adc 采样值不可能为负值,返回负值表示出错
  474. }
  475. rt_adc_enable(adc_dev, ADC_DEV_CHANNLE_2);
  476. adc10_rain = rt_adc_read(adc_dev, ADC_DEV_CHANNLE_2);
  477. rt_adc_disable(adc_dev, ADC_DEV_CHANNLE_2);
  478. HAL_ADCEx_Calibration_Start(adc_dev->parent.user_data);
  479. // rt_kprintf("read light value:%d\n",adc10_rain);
  480. return adc10_rain;
  481. }
  482. // 获取内部温度传感器值
  483. short Get_Temprate(void)
  484. {
  485. short result;
  486. double temperate;
  487. rt_adc_device_t adc_dev; /*ADC设备句柄*/
  488. adc_dev = (rt_adc_device_t)rt_device_find(ADC_DEV_NAME);
  489. if (adc_dev == RT_NULL)
  490. {
  491. rt_kprintf("adc sample run failed! can't find %s device!\n", ADC_DEV_NAME);
  492. return RT_ERROR; // adc 采样值不可能为负值,返回负值表示出错
  493. }
  494. HAL_ADCEx_Calibration_Start(adc_dev->parent.user_data);
  495. rt_adc_enable(adc_dev, ADC_DEV_CHANNLE_6);
  496. adc16_value = rt_adc_read(adc_dev, ADC_DEV_CHANNLE_6);
  497. /* 关闭通道 */
  498. rt_adc_disable(adc_dev, ADC_DEV_CHANNLE_6);
  499. temperate = (float)adc16_value * (3.3 / 4096); // 电压值
  500. temperate = (1.43 - temperate) / 0.0043 + 25; // 转换为温度值
  501. result = temperate *= 100; // 扩大100倍.
  502. return result;
  503. }
  504. /**
  505. * Rv: 热敏电阻当前阻值
  506. * B: 热敏电阻参数B值
  507. * Revise: 校正温度
  508. * BasicRx: 热敏电阻25度时电阻(标称电阻数值)
  509. * 返回: 摄氏度
  510. */
  511. int TempCalculate(float Rv, int B, int BasicRx)
  512. {
  513. float Rx;
  514. Rx = Rv * 1.0 / BasicRx;
  515. Rx = log(Rx);
  516. Rx = Rx / B;
  517. Rx = 1 / (Rx + 0.003354);
  518. // Rx = Rx + 0.003356;
  519. // Rx = 1 / Rx;
  520. Rx = Rx - 273.13;
  521. return (int)(Rx + 0.5);
  522. }
  523. /*
  524. * 中位值平均滤波法
  525. * */
  526. unsigned int filter_Mid(int adc_return)
  527. {
  528. unsigned char count, i, j;
  529. unsigned int value_buf[N], temp = 0;
  530. int sum = 0;
  531. for (count = 0; count < N; count++)
  532. {
  533. value_buf[count] = adc_return;
  534. // rt_kprintf("value_buf:%d-%d\n",value_buf[count],count);
  535. rt_thread_delay(10);
  536. }
  537. for (j = 0; j < N - 1; j++)
  538. {
  539. for (i = 0; i < N - j - 1; i++)
  540. {
  541. if (value_buf[i] > value_buf[i + 1])
  542. {
  543. temp = value_buf[i];
  544. value_buf[i] = value_buf[i + 1];
  545. value_buf[i + 1] = temp;
  546. }
  547. }
  548. }
  549. for (count = 1; count < N - 1; count++)
  550. {
  551. sum += value_buf[count];
  552. }
  553. return (int)(sum / (N - 2));
  554. }
  555. /*
  556. 限幅消抖滤波法
  557. A、方法:
  558. 相当于“限幅滤波法”+“消抖滤波法”
  559. 先限幅,后消抖
  560. B、优点:
  561. 继承了“限幅”和“消抖”的优点
  562. 改进了“消抖滤波法”中的某些缺陷,避免将干扰值导入系统
  563. C、缺点:
  564. 对于快速变化的参数不宜
  565. */
  566. unsigned int filter_voltage(void)
  567. {
  568. uint8_t data_cnt = 0;
  569. int value = 0, new_value = 0;
  570. new_value = Read_Real_Voltage();
  571. while (value != new_value)
  572. {
  573. data_cnt++;
  574. if (data_cnt >= N)
  575. return new_value;
  576. rt_thread_delay(10);
  577. new_value = Read_Real_Voltage();
  578. }
  579. return value;
  580. }
  581. /*读取加热仓温度*/
  582. int Read_Ntc_Voltage(void)
  583. {
  584. rt_adc_device_t adc_dev; /*ADC设备句柄*/
  585. adc_dev = (rt_adc_device_t)rt_device_find(ADC_DEV_NAME);
  586. if (adc_dev == RT_NULL)
  587. {
  588. rt_kprintf("adc sample run failed! can't find %s device!\n", ADC_DEV_NAME);
  589. return RT_ERROR; // adc 采样值不可能为负值,返回负值表示出错
  590. }
  591. rt_adc_enable(adc_dev, ADC_DEV_CHANNLE_4);
  592. adc12_ntc = filter_Mid(rt_adc_read(adc_dev, ADC_DEV_CHANNLE_4));
  593. // LOG_D("Read_Ntc_Voltage:%d",adc12_ntc);
  594. rt_adc_disable(adc_dev, ADC_DEV_CHANNLE_4);
  595. HAL_ADCEx_Calibration_Start(adc_dev->parent.user_data);
  596. return adc12_ntc;
  597. }
  598. /* 创建线程 */
  599. int sht30_collect(void)
  600. {
  601. /* 创建线程*/
  602. tid1 = rt_thread_create("sht30_collect_thread", sht30_collect_thread_entry, RT_NULL, THREAD_STACK_SIZE, THREAD_PRIORITY, THREAD_TIMESLICE);
  603. tid2 = rt_thread_create("Power Check thread", Power_ReadCheck, RT_NULL, P_THREAD_STACK_SIZE + 512, P_THREAD_PRIORITY, P_THREAD_TIMESCLICE);
  604. /* 如果获得线程控制块,启动这个线程 */
  605. if (tid1 != RT_NULL)
  606. rt_thread_startup(tid1);
  607. if (tid2 != RT_NULL)
  608. rt_thread_startup(tid2);
  609. return 0;
  610. }
  611. // 控制台打印传感器信息
  612. void Msh_DisplaySensor(void)
  613. {
  614. rt_kprintf("温度:%d\n", tem_value);
  615. rt_kprintf("湿度:%d\n", hum_value);
  616. rt_kprintf("电压:%s\n", device_status.voltage);
  617. rt_kprintf("电流:%s\n", device_status.power);
  618. }
  619. MSH_CMD_EXPORT(Msh_DisplaySensor, Msh_DisplaySensor);
  620. MSH_CMD_EXPORT(Read_Rain_Voltage, Read_Rain_Voltage);
  621. MSH_CMD_EXPORT(Read_Light_Voltage, Read_Light_Voltage);